Filter
Top Products
- 908 -
Selection Criteria
MAC ACL - Select the MAC ACL for which to create or update a rule.
Rule - Select an existing rule or select 'Create New Rule' to add a new Rule. New rules cannot be
created if the maximum number of rules has been reached. For each rule, a packet must match all the
specified criteria in order to be true against that rule and for the specified rule action (Permit/Deny) to
take place.
Configurable Data
Rule - Enter a whole number in the range of (1 to 8) that will be used to identify the rule.
Action - Specify what action should be taken if a packet matches the rule's criteria. The choices are
permit or deny.
Logging - When set to 'True', logging is enabled for this ACL rule (subject to resource availability in
the device). If the Access List Trap Flag is also enabled, this will cause periodic traps to be generated
indicating the number of times this rule was 'hit' during the current report interval. A fixed 5 minute
report interval is used for the entire system. A trap is not issued if the ACL rule hit count is zero for the
current interval. This field is visible for a 'Deny' Action.