Filter
Top Products
- 930 -
Queue in SAN Priority Group - List of queues in SAN priority group.
Queue in IPC Priority Group - List of queues in IPC priority group.
11.7.4.8 Configuring Congestion Notification (CN)) Global configuration
Selection Criteria
CNM Admin Mode - Enable/Disable congestion notification message(CNM) handling.
• Enable - to enable handling congestion notification message.
• Disable - to disable handling congestion notification message.
The system's default CNM handling is Enabled.
CN-TAG Processing - Enable/Disable CN-TAG processing.
• Enable - configure the CNTAG Ether Type is recognized by parsing stages.
• Disable - configure CNTAG Ether Type is unrecognized.
CN-Tag Ether Type can be recognized by default.
CPID LSB Field - Control the LSB field of Congestion Point Identifier of CNM payload.
• CPIndex - Configure device identifier to use congestion point index.
• Q_No - Set the CPID mode to use queue number of sampled packet.
The system's default LSB field of CPID is using queue number of sampled packet.
CNM Generation Behavior - Set Congestion Notification Message Generation Behavior. Choose
the CNM generation behavior when congestion notification threshold is reached but the incoming
sampled packet does not have CN-TAG.
• Enable - Keep generate CNM.
• Disable - Not generate CNM
The system¡¦s default behavior of CNM generation is not generate.