Filter
Top Products
- 94 -
<slot/port> - Interface number.
Default Setting
None
Command Mode
Global Config
7.2.6.14 show ip igmp snooping
The user can go to the CLI Privilege Exec to get all of igmp snooping information, use the show ip igmp
snooping Privilege command.
Syntax
show ip igmp snooping
Default Setting
None
Command Mode
Privilege Exec
Display Message
When the optional arguments <slot/port> or <vlanid> are not used, the command displays the following
information.
Admin Mode: Indicates whether or not IGMP Snooping is active on the switch.
Interfaces Enabled for IGMP Snooping: Interfaces on which IGMP Snooping is enabled.
Multicast Control Frame Count: Displays the number of IGMP Control frames that are processed
by the CPU.
VLANs Enabled for IGMP Snooping: VLANs on which IGMP Snooping is enabled.
When you specify the <slot/port> values, the following information displays.
IGMP Snooping Admin Mode: Indicates whether IGMP Snooping is active on the interface.
Fast Leave Mode: Indicates whether IGMP Snooping Fast Leave is active on the interface.
Group Membership Interval: Shows the amount of time in seconds that a switch will wait for a report
from a particular group on a particular interface, which is participating on the interface, before deleting
the interface from the entry. This value may be configured.
Max Response Time: Interface on which IGMP Snooping is enabled.
Multicast Router Expiry Time: Displays the amount of time to wait before removing an interface that
is participating on the interface from the list of interfaces with multicast routers attached. The interface
is removed if a query is not received. This value may be configured.