Filter
Top Products
- 952 -
Selection Criteria
Slot/Port - Select the physical interface for which data is to be displayed. There must be configured at
least one router interface before displaying data for a PIM-DM interface, otherwise a message will be
displayed.
Non-Configurable Data
Interface Mode - Displays the administrative status of PIM-DM for the selected interface. The default
is disabled.
Protocol State - The operational state of the PIM-DM protocol on this interface.
Hello Interval (secs)- The frequency at which PIM hello messages are transmitted on the selected
interface.
IP Address - The IP address of the selected interface.
Neighbor Count - The number of PIM neighbors on the selected interface.
Designated Router - The designated router on the selected PIM interface. For point- to-point
interfaces, this will be 0.0.0.0.
Neighbor IP - The IP address of the PIM neighbor for which this entry contains information.
Uptime - The time since this PIM neighbor (last) became a neighbor of the local router.
Expiry Time - The minimum time remaining before this PIM neighbor will be aged out.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
11.8.5 Managing PIM-SM Protocol
11.8.5.1 Configuring PIM-SM Global Configuration Page