Filter
Top Products
204 Fortinet Inc.
Addresses Firewall configuration
Deleting addresses
Deleting an address removes it from an address list. To delete an address that has
been added to a policy, you must first remove the address from the policy.
To delete an address
1 Go to Firewall > Address.
2 Select the interface list containing the address that you want to delete.
You can delete any address that has a Delete Address icon .
3 Choose an address to delete and select Delete .
4 Select OK to delete the address.
Organizing addresses into address groups
You can organize related addresses into address groups to make it easier to add
policies. For example, if you add three addresses and then add them to an address
group, you only have to add one policy using the address group rather than a separate
policy for each address.
You can add address groups to any interface, VLAN subinterface, or zone. The
address group can only contain addresses from that interface, VLAN subinterface, or
zone. Address groups are available in interface, VLAN subinterface, or zone source or
destination address lists.
Address groups cannot have the same names as individual addresses. If an address
group is included in a policy, it cannot be deleted unless it is first removed from the
policy.
To organize addresses into an address group
1 Go to Firewall > Address > Group.
2 Select the interface, VLAN subinterface, or zone that you want to add the address
group to.
3 Enter a Group Name to identify the address group.
The name can contain numbers (0-9), uppercase and lowercase letters (A-Z, a-z), and
the special characters - and _. Other special characters and spaces are not allowed.
4 To add addresses to the address group, select an address from the Available
Addresses list and select the right arrow to add it to the Members list.
5 To remove addresses from the address group, select an address from the Members
list and select the left arrow to remove it from the group.
6 Select OK to add the address group.