Filter
Top Products
296 Fortinet Inc.
Configuring Cerberian URL filtering Web filtering
You can add users to the default group and apply any policies to the group.
Use the default group to add:
• All the users who are not assigned alias names on the FortiGate unit.
• All the users who are not assigned to other user groups.
The Cerberian web filter groups URLs into 53 categories. The default policy blocks the
URLs of 12 categories. You can modify the default policy and apply it to any user
groups.
To configure Cerberian web filtering
1 Add the user name, which is the alias you added on the FortiGate unit, to a user group
on the Cerberian server.
Web policies can be applied only to user groups. If you did not enter an alias for a
user’s IP address on the FortiGate unit, the user’s IP address is automatically added
to the default Cerberian group.
2 Create policies by selecting the web categories that you want to block.
3 Apply the policy to a user group that contains the user.
For detailed procedures, see the online help on the Cerberian Web Filter web page.
Enabling Cerberian URL filtering
After you add the Cerberian users and groups and configure the Cerberian web filter,
you can enable Cerberian URL filtering.
To enable cerberian URL filtering
1 Go to Web Filter > URL Block > Cerberian URL Filtering.
2 Select the Cerberian URL Filtering option.
3 Go to Firewall > Content Profile.
4 Create a new or select an existing content profile and enable Web URL Block.
5 Go to Firewall > Policy.
6 Create a new or select an existing policy.
7 Select Anti-Virus & Web filter.
8 Select the content profile from the Content Profile list.
9 Select OK.