Filter
Top Products
Logging and reporting Configuring alert email
FortiGate-4000 Installation and Configuration Guide 317
Enabling alert email
You can configure the FortiGate unit to send alert email in response to virus incidents,
intrusion attempts, and critical firewall or VPN events or violations. If you have
configured logging to a local disk, you can enable sending an alert email when the
hard disk is almost full.
To enable alert email
1 Go to Log&Report > Alert Mail > Categories.
2 Select Enable alert email for virus incidents.
Alert email is not sent when antivirus file blocking deletes a file.
3 Select Enable alert email for block incidents to have the FortiGate unit send an alert
email when it blocks files affected by viruses.
4 Select Enable alert email for intrusions to have the FortiGate unit send an alert email
to notify the system administrator of attacks detected by the NIDS.
5 Select Enable alert email for critical firewall/VPN events or violations to have the
FortiGate unit send an alert email when a critical firewall or VPN event occurs.
Critical firewall events include failed authentication attempts.
Critical VPN events include when replay detection detects a replay packet. Replay
detection can be configured for both manual key and AutoIKE Key VPN tunnels.
6 Select Send alert email when disk is full to have the FortiGate unit send an alert email
when the hard disk is almost full.
7 Select Apply.