Filter
Top Products
288
no access-list {<1-99> | <100-199>}
Note: The ACL number is an integer from 1 to 199. The range 1 to 99 is for the normal ACL
List and 100 to 199 is for the extended ACL List.
Default Setting
None
Command Mode
Global Config
5.13.2.7 ip access-group
This command attaches a specified access-control list to an interface.
Syntax
ip access-group <1- 199> in [<1-4294967295>]
<1- 199> The identifier of this ACL.
<1-4294967295> The sequence number of this ACL.
Default Setting
None
Command Mode
Global Config, Interface Config
5.14 CoS (Class of Service) Command
5.14.1 Show Commands
5.14.1.1 show queue cos-map
This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes
for a specific interface. The slot/port parameter is optional and is only valid on platforms that