Filter
Top Products
399
Command Mode
Privileged Exec
Display Message
Router Interface: The IP address of this neighbor.
Neighbor: The neighbor associated with the router interface.
Metric: The metric value associated with this neighbor.
TTL: The TTL threshold associated with this neighbor.
Flags: Status of the neighbor.
7.3.1.6 show mstat
This command is used to display the results of packet rate and loss information from the
results buffer pool of the router, subsequent to the execution/completion of a ‘mstat
<source> [group] [receiver]’ command. Within two minutes of the completion of the ‘mstat’
command, the results will be available in the buffer pool. The next issuing of "mstat" would
overwrite the buffer pool with fresh results.
Syntax
show mstat
Default Setting
None
Command Mode
Privileged Exec
Display Message
7.3.1.7 show mtrace
This command is used to display results of multicast trace path from the results buffer pool of
the router, subsequent to the execution/completion of a "mtrace <source> [group] [receiver]"
command. The results subsequent to the completion of the "mtrace" will be available in the
buffer pool within 2 minutes and thereafter. A subsequent "mtrace" command would
overwrite the results in the buffer pool.
Syntax