Filter
Top Products
Appendix C Syslog Message List
> C.2 Syslog Message List
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
840
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
I 00080700 Modify Performance Monitor settings: Operation=sssss
Obtaining performance information is started or stopped.
I 00080900 Modify Disk Performance Monitor settings: Operation=sssss
Disk performance monitor is changed.
I 00090100 Apply Configuration data: Mode=mmmm
Configuration information setting is applied.
I 00090200 Change License status: kind=aaaa mode=tttt
License is registered or deleted.
I 00090300 Modify system date/time settings:
Date/time settings are changed.
I 00090400 Modify Sub System Parameters:
Subsystem parameters are changed.
I 00090500 Modify Cache settings:
Cache capacity and cache controlling parameters are changed.
I 00090600 Execute Force Write Back:
Forcible write back is performed.
I 00090700 Modify Disk Tuning Parameters:
Disk tuning parameters are changed.
I 00090800 Modify Disk Patrol settings:
Disk patrol is changed.
I 00090900 Change Encryption mode: Mode=ffff
Encryption mode is set.
I 00090A00 Modify Backend FC Rate settings:
FC transfer rate is changed.
I 00090B00 Modify Debug Mode settings:
Debug mode settings are changed.
I 00090C00 Initialize System Disks:
System disks are initialized.
I 00090D00 Export Configuration:
Configuration information is exported.
I 00090E00 Modify BoxID:
Box ID is changed.
I 000A0100 Power on completed: Version=xxxxxxxxxxx
The device status is changed to Ready.
I 000A0200 Shutdown started: Reason=nnnnn
Device shutdown is started.
I 000A0300 Change Maintenance mode Operation=sssss
Maintenance operation is started or stopped.
I 000A0400 Start Module replacement process: Parts=cccc
Maintenance (or preventive maintenance) of the component in hot mode is
started.
Event type code Upper: Message
Lower: Description