Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Appendix J Factory Default List
J.2 Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
1035
Modify FC Port
Parameters
(When the port
mode is "Initiator")
Connection FC-AL
Fabric
FC-AL
Set Loop ID Manual
Manual
Auto
Loop ID When "Set Loop ID" is "Manual"
0x0
When "Set Loop ID" is "Auto"
Ascending
When "Set Loop ID" is "Manual"
0x0 – 0x7D
When "Set Loop ID" is "Auto"
Ascending
Descending
Transfer Rate Auto-negotiation
Auto-negotiation
1 Gbit/s
2 Gbit/s
4 Gbit/s
8 Gbit/s
16 Gbit/s
The available transfer rate varies
depending on the CA type.
Frame Size 2048
512 (bytes)
1024 (bytes)
2048 (bytes)
WWN (Port Name) WWPN of the ETERNUS DX Disk
storage system
WWPN (16-digit hexadecimal)
WWN (Node Name) WWNN of the ETERNUS DX Disk
storage system
WWNN (16-digit hexadecimal)
Modify iSCSI Port
Parameters
(When the port
mode is "CA")
IP Version IPv4
IPv4
IPv6
IPv4 / IPv6
IP Address 192.168.xxx.xxx
Up to 3 numeric characters
First text box
1 – 255
Other text boxes
0 – 255
Subnet Mask 255.255.255.0
Up to 3 numeric characters
All text boxes
0 – 255
IPv6 Link Local
Address
Address that is obtained from the
WWN of the ETERNUS DX Disk
storage system
fe80::xxxx:xxxx:xxxx:xxxx
xxxx: 0 – ffff (FFFF)
(hexadecimal, alphanumeric
characters)
TCP Port No. 3260
0 – 28671
TCP Window Scale 2
0 – 14
Congestion Control
Option
Enable
Enable
Disable
Function Setting item Default value Allowed input