Filter
Top Products
Chapter 3 Initial Setup
3.2 Initial Setup 2
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
50
The procedure to perform Initial Setup 2 is as follows:
Procedure
1 Click [Start Initial Setup] in [Action].
2 Click the [Next >>] button.
→ Initial Setup restarts.
• When logging in again after Initial Setup 1 is complete, the [Initial Setup 2] screen appears.
• If all of the settings of Initial Setup 2 are not performed, click the [All Skip] button to exit the Initial
Setup wizard.