Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
511
IP Version
Select the IP version of the iSCSI host from "IPv4" and "IPv6".
IP Address
Specify the IP address of the iSCSI host.
There are two methods to specify an IP address; "IPv4" and "IPv6". The IP address must be specified
with the selected IP version (IPv4 or IPv6). The following IPv6 addresses can be used; "link local
address", "global address", "unique local address", and "6to4 address". Refer to "Available IPv6
Address" (page 757) for details. When the current setting is displayed, the IPv6 address is displayed
as an abbreviation.
It is not necessary to specify this item if IP address is not used.
The following input conditions apply:
- For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
- For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
Alias Name
Specify the Alias name of the iSCSI host. It is not necessary to specify this item if Alias name is not
used. An existing Alias name cannot be specified.
The following input conditions apply:
- Up to 31 alphanumeric characters and symbols (except ", (comma)" and "?")
- Space
CHAP User ID
Specify the user ID for CHAP Authentication. It is not necessary to specify this item if CHAP
Authentication is not used.
Configure the user ID and the password as a pair.
The following input conditions apply:
- Up to 255 alphanumeric characters and symbols (except ", (comma)" and "?")
- Space
If the host response is changed for an iSCSI host that is configured with the host affinity setting,
the LUNs may not be able to be accessed from the iSCSI host. Make sure to check the current LUN
settings and select a host response with an appropriate "Host Specific Mode" to change the host
response.
Available: The host can recognize LUNs
N/A: The host cannot recognize some LUNs
LUN settings for LUN groups
with host affinity settings
Host Specific Mode
Normal AIX Mode
NR1000V
Mode
HP-UX
Mode
BS2000
Mode
LUN#0 – LUN#255 Available Available Available Available Available
LUN#0 - LUN#511 N/A Available Available Available Available
LUN#0 - LUN#1023 N/A N/A N/A Available Available
LUN#0 - LUN#4095 N/A N/A N/A N/A Available