Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
614
2 Select the SAS port bandwidth limit, and click the [Set] button.
• Bandwidth Limit
Select the maximum performance in IOPS (throughput value). If the bandwidth limit is not applied,
select "Unlimited".
→ A confirmation screen appears.
3 Click the [OK] button.
→ The SAS port QoS setting starts.
4 Click the [Done] button to return to the [SAS Port QoS] screen.
End of procedure
9.2.7.12 Set FCoE Port QoS
This function specifies the bandwidth limit (maximum performance limit) for the FCoE port.
This function can be used, irrespective of whether the Host-LU QoS is enabled or disabled. However, if the
Host-LU QoS has been disabled, the host starts operating within the configured bandwidth limit after the
Host-LU QoS is enabled.