Filter
Top Products
2 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1060 • November 2007
Japanese Site:
http://primeserver.fujitsu.com/sparcenterprise/download/firmwa
re/
Note – When the XCP version preinstalled in your server is under XCP 1060, you
must upgrade to XSCF Control Package(XCP) 1060 or later. Use the web browser
interface, also known as the browser user interface (BUI), to import XCP firmware
and then execute the flashupdate(8) command to upgrade the XCP firmware with
the XSCF Shell.
Caution – CR ID #6534471: Improper handling of large page in kernel memory may
cause random panics. Implement the workaround for CR ID #6534471 or check for
the availability of a patch and install it immediately. This bug has been fixed in
125100-06 and Solaris 10 8/07.
■ The first version of the Solaris™ Operating System (OS) to support these servers
is the Solaris 10 11/06 OS.
Note – All SPARC Enterprise M8000/M9000 servers must be upgraded to XCP 1050
or later in order to support adding future COD Right To Use (RTU) licenses. Contact
your local Service Representative for assistance.
Solaris Patch Information
This section lists mandatory patches for the SPARC Enterprise M8000/M9000
servers.
These patches are not required for servers running Solaris 10 8/07 OS.
■ 118833-36 (Install 118833-36 before 125100-04.)
■ 125100-04 or later
■ 120068-03 or later
■ 123839-07 or later
■ 125424-01 or later
■ 125075-01 or later
■ 125670-02 or later