Filter
Top Products
8
LifeBook N Series Notebook BIOS
Primary Slave Submenu of the Main Menu
The Primary Slave submenu allows you to configure secondary ATA devices.
Figure 3. Primary Slave Submenu
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field Options Default Description
Type:
■
Auto
■
None
■
CD-ROM
■
Hard Disk
[Auto] NOTE: The Type field does not appear as a drop-down menu. Tap
the spacebar to cycle through the selections.
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM,
SuperDisk or Hard Disk for appropriate drive type installed at
this connection.
CHS Format Cylinders/Heads/Sectors
Cylinders:
■
A number between
0 and 65,535
–— This item appears only when Hard Disk is selected as the type. This
field is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
Heads:
■
A number between
1 and 16
–— This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
Sectors:
■
A number between
0 and 63
–— This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Main
Item Specific Help
Select Serial ATA/ATAPI
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Primary Slave [HL-DT-ST DVDRAM GMA-4080N-(PS)]
Type: [Auto]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
Transfer Mode: [Multiword DMA 2]
Ultra DMA Mode: [Mode 2]
▲