Garmin 720C Projector User Manual


 
6 Welcome
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
To receive an S-Video signal, you need an S-Video cable. (One is
usually provided with your video device.)
To receive a component video signal from a VCR or other video
device, you need a D-sub 15-pin to component video cable
(available from EPSON; see page 7).
To amplify your computer’s audio through the projector’s sound
system, you need a computer audio cable (male-to-male 3.5-mm
stereo miniplug cable). See your computer or electronics dealer to
obtain this cable.
Some older PowerBooks and Macintosh desktop models may
need the Macintosh adapter set shown on page 79 (available from
EPSON; see page 7). Older iMac systems may need a special
adapter to provide a VGA output port; see your computer dealer.
720-730.book Page 6 Thursday, October 30, 2003 11:32 AM