Filter
Top Products
28 Using the Projector
Shutting Down the Projector
When you’ve finished using the projector, follow the recommended
procedure to shut it down. This extends the life of the lamp and
protects the projector from possible overheating.
1. If you’re using a computer, shut it down first.
2. To turn off the projector, press the
Power button on the
projector or remote control. You see a confirmation message. (If
you don’t want to turn it off, press any other button.)
3. Press the
Power button again. The power light flashes orange for
about forty five seconds as the projector cools down. When the
projector has cooled, the orange light stays on and the exhaust fan
shuts off.
If you want to turn the projector on again, wait until the orange
light stops flashing. Then press the
Power button.
4. Retract the front feet as shown.
note
When the projector has not
received any input signals for
3
0 minutes, it automatically
turns off the projector lamp
and enters “sleep mode.” This
conserves electricity, cools the
p
rojector, and extends the life
of the lamp. If you are done
using the projector, unplug
the power cord. If you want
to start projecting again, press
the Power button.
Menu
A/V Mute
E-Zoom
Freeze
Color Mode
S-Video/Video
Computer
Page upPage down
Power
caution
To avoid damaging the
projector or lamp, never
unplug the power cord
when the power light is
green or flashing orange.
720-730.book Page 28 Thursday, October 30, 2003 11:32 AM