Filter
Top Products
Getting Started with the Configuration Manager
14 EN/LZT 108 6492 R2 - October 2003
Table Heading Description
Device Displays basic information about the HM210dp/di
hardware and software versions, the system uptime
(since the last reboot), and the preconfigured
operating mode.
DSL Displays the operational status, version, and
performance statistics for the DSL line. You can click
on DSL in the table heading or display the WAN tab to
view additional DSL settings, which are described in
chapter x.
WAN Interfaces Displays the software name(s) and various settings
for the device interface(s) that communicates with
your ISP via DSL. Although you only have one
physical DSL port, multiple software-defined
interfaces can be configured to use it.
For each interface, a “Lower Interface” name, such as
aal5-0, should display. You can click on the lower
interface name to view or change the ATM VC
settings that this interface uses.
LAN Interfaces Displays the software names and various settings for
the device interfaces that communicate directly with
your network. This typically includes an Ethernet
interface named eth-0.
Services Summary Displays the status of various services that the
HM210dp/di performs to help you manage your
network. A green ball indicates the service is active
and a red X indicates that it is inactive:
NAT – Translating private IP addresses to your public
IP address.
IP Filter – Setting up filtering rules that accept or deny
incoming or outgoing data.
RIP – Enabling router-to-router communication.
DHCP Relay – Enabling dynamic assignment of IP
information from your ISP to your computers.
DHCP Client – Enabling dynamic assignment of IP
information from your ISP or another computer on
your network to the device’s LAN port.
DHCP Server – Enabling dynamic assignment of IP
information from the device’s built-in DHCP server to
your LAN computers.
IGMP – Enabling message forwarding from external
sources such as your ISP, based on Internet Group
Management Protocol (not configurable).