Filter
Top Products
Getting Started with the Configuration Manager
16 EN/LZT 108 6492 R2 - October 2003
4.4.1 Rebooting the HM210dp/di using Options
If, after rebooting the device, you find that it does not operate properly with
the new configuration, you can reboot using options that reactivate a
previous configuration or the factory default configuration.
1. Select Admin > Commit & Reboot. The Commit & Reboot page
appears:
2. In the Reboot Mode: dropdown list you can select from the following
options before clicking the Reboot button.
Setting Description
Reboot Reboots the device to activate your new
settings (if any).
Reboot from Default
Configuration
Reboots the device to default settings provided
by your ISP or the manufacturer. Choosing this
option erases any custom settings.
Reboot from Backup
Configuration
Reboots the device using settings stored in
backup memory. These are the settings that
were in effect before you committed new
settings in the current session.
Reboot from Last
Configuration
Reboots the device using the current settings in
permanent memory, including any changes you
just committed.
Reboot from Clean
Configuration