Filter
Top Products
Basic Configuration
EN/LZT 108 6492 R2 - October 2003
33
5.4 Configuring IPoA Interfaces
This section describes how to configure an IPoA (Internet Protocol-over-
ATM) interface on the HM210dp/di.
An IPoA interface can be used to exchange IP packets over the ATM
network, without using an underlying Ethernet over ATM (EoA) connection.
Typically, this type of interface is used only in product development and test
environments, to eliminate unneeded variables when evaluating IP layer
processing.
5.4.1 Adding IPoA Interfaces
Follow these instructions to add an IPoA interface:
1. Select WAN > IPoA to display the IPoA Configuration page.
2. Click the Add button to display the IPoA Interface – Add page:
3. Enter the provided fields as below:
Field Description
IPoA Interface:
Select an IPoA interface from the available
interfaces, e.g. ipoa-0.
Conf. IP Address:
Enter the IP address given by your ISP.