Filter
Top Products
Completing the connections 21
Attaching the cables to the retractor
To attach the cables:
1 Route the cables from the back of the system drawer to the cable retractor.
2 Attach the cables to the cable retractor, making sure the cables have
sufficient slack when the system drawer is pulled forward and pushed
back into place.
3 Route the cables to their destinations and attach as necessary.
4 If necessary, bundle any excess cable.
Completing the connections
Now that the system drawer is installed in the cabinet, make the system
connections.
Important A wide variety of system connections are possible. Your
actual system connections may be different from the
following examples.
Cable
Cable retractor