Filter
Top Products
Chapter 4: Web-Based Management
42 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
set up for this service, you will get an IP address assigned over the network. If you
don't get an address in about 30 seconds, you probably don't have DHCP.
IP Configuration
The IP Configuration includes the IP Address, Subnet Mask and Gateway. The
Configured column is used to view or change the IP configuration. Fill up the IP
Address, Subnet Mask and Gateway for the device. The screen in Figure 25 appears.
Figure 25: IP configuration interface
This page includes the following fields:
OBJECT DESCRIPTION
DHCP
Enable or disable the DHCP client function.
When DHCP function is enabled, the Managed Switch will be assigned
an IP address
from the network DHCP server. The default IP address will
be replaced by the assigned IP address on DHCP server. After the user
clicks Apply, a popup dialog shows up to inform the user that when the
DHCP client is enabled, the current IP will lose and user should find the
new IP on the DHCP server.
IP Address
Assign the IP address that the network is using.
If DHCP client function is enabled, this switch is configured as a DHCP
client. The network DHCP server will assign the IP address to the switch
and display it in this column.
The default IP is 192.168.0.100 or the user has to assign an IP address
manually when DHCP Client is disabled.