Filter
Top Products
99
8
Message Error Code Cause Action
Press [STOP]. Try your
operation again.
Divide the document and
send or copy each part
separately.
Contact the other party.
Have them divide the
document and send each
part separately.
Use a copy machine to
make a reduced copy of
the document and send
the copy.
Place the handset prop-
erly into its cradle.
Print out any documents
that are stored in
memory. Then start the
operation again.
(See p. 68)
Divide the documents and
send each part separately.
If you want the FAXPHONE
to continue, do nothing. If
you want to stop sending,
wait until the FAXPHONE
starts to dial the number,
then press [STOP].
Contact the other party
and have them install
paper in their fax.
Register the number.
(See pp. 39 and 41)
Enter numbers that are
allowed only.
An error occurred in
the printer.
It took more than 32
minutes to send or
copy a document.
It took more than 32
minutes to receive a
document.
The document is
longer than 39.4 in.
(1 m).
The handset is off
hook.
The memory of the
FAXPHONE is full
because it has
received too many
documents.
The memory is full
because you tried to
send too many pages
at once.
Sequential broad-
casting is in
progress, with a
pause between calls.
The other party’s fax
is out of paper.
The One-touch
Dialing or Coded
Speed Dialing
number has not been
registered.
The number you
entered is out of
range.
CHECK PRINTER –
DOC. TOO LONG #003
HANG UP PHONE –
MEMORY FULL #037
MULTI TRANS. ON –
NO RX PAPER #012
NO TEL # #022
OUT OF RANGE _
Error codes, messages and solutions