Filter
Top Products
23
1
5 Use [ ] or [ ] to select a ring pattern.
❚ NORMAL RING
❚ DOUBLE RING
❚ SHORT-SHORT-LONG
❚ SHORT-LONG-SHORT
❚ OTHER RING TYPE
▼
When the pattern you want to set is displayed,
press [START/COPY].
6 Use [ ] or [ ] to select TEL, FAX or FAX/TEL
SWITCH.
❚ TEL
❚ FAX
❚ FAX/TEL SWITCH
▼
When the setting you want to set is displayed,
press [START/COPY].
Wait a second for DOUBLE RING to appear.
7 Press [STOP] to finish.
To make additional assignments, start from step 5.
To finish, press [STOP].
NORMAL RING
▼
NORMAL RING
TEL
FAX
▼
DATA ENTRY OK
DOUBLE RING
Distinctive Ring Pattern Detection (DRPD) feature
When DRPD is set to ON, the communication type for each ring pattern
defaults to TEL (except for the DOUBLE RING pattern which defaults
to FAX). After you select the ring pattern that has been assigned for
your fax communications, you need to make sure that the other ring
patterns are not set to FAX. Otherwise, the FAXPHONE may answer as
a fax for each ring pattern.