Filter
Top Products
Chapter 4: Web-Based Management
138 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
Figure 95: LLDP Per Port Configuration
This page includes the following fields:
OBJECT DESCRIPTION
LLDP Status Enable/Disable LLDP.
LLDP hello time You can change LLDP hello time value. The time interval between the
transmission LLDP info packets. Value range is from 5 to 32768. Default
value is 30.
LLDP hold time You can change LLDP hold time value. (The hold time * the hello time) is
the TTL time in the LLDP info packets. Value range is from 2 to 10. Default
value is 4.
Port Status You can change LLDP port status to Tx_only/Rx_only/Tx_and_Rx/Disable.
Tx_only: LLDP transmit the packet of the port only. Rx_only: LLDP receive
the packet of the port only. Tx_and_Rx: LLDP transmit and receive the
packets of the port. Disable: LLDP do not transmit and receive the
packets of the port.