GE GFK0579B Scanner User Manual


 
C
Series 90–70 Remote I/O Scanner User’s Manual – July 1992134
Step 1: Create or Select a PLC Program Folder
To begin configuring a remote drop, go to the Program Folder screen and select or
create the PLC program folder. If the Bus Controller has not already been configured,
continue at step 2. If you are adding a Remote I/O Scanner to a bus that has already
been configured, go to step 3 now.
Step 2: Add the Remote I/O Scanner to the Genius Bus
Display the configuration screen for the rack where the Bus Controller is located. If the
Bus Controller has not already been configured, use the F2 (Genius) key to enter it in
the intended slot, like the example shown below.
Instructions for configuring a Bus Controller are given in the Logicmaster 90–70
Software User’s Manual.