Filter
Top Products
D
Series 90–70 Remote I/O Scanner User’s Manual – July 1992150
Step 4: Store the Configuration to the Remote Drop
After creating or editing the configuration of a remote drop, the configuration can
either be saved to disk, or stored to the remote drop.
Caution
Be sure the configuration does not contain too many option modules,
or too much I/O configuration data. Attempting to store an illegal
configuration will generate an “Illegal Configuration” error message,
and any earlier configuration will be DELETED, except for the
Device Number, baud rate, and the remote drop ID.
Follow these steps to store the configuration to a remote drop.
1. Go to the Program Utility Functions menu. Select F2 ... Store from Programmer
to PLC .
The SNP ID of the remote drop should appear as part of the name of the Current
Folder, and as the ID in the screen’s status area. For example:
DROP016
2. Press the Enter key. The Store screen appears.
3. Press Enter again to store the configuration.