Filter
Top Products
4
67Chapter 4 Configuration with Logicmaster 90–70
Entering Additional Modules
Configure the rest of the modules in the Remote Drop in the same way. You can also
copy, delete, and undelete module configurations.
Modules of the same type are automatically given the next Reference Address that is
available in the remote drop.
Reference Address
increments automatically,
based on limits for the
remote drop.
You can use this address, or change it. If you enter a higher address, the references you
skip will remain part of the I/O map (assuming that the module lies within the span of
the I/O map limits). If you skip references, remember that you will be consuming
references in both the remote drop and the PLC, and adding to the Genius bus scan
time.