GE GFK-0787B Noise Reduction Machine User Manual


 
6
6-24 Genius Modular Redundancy Flexible Triple Modular Redundant (TMR) System
User’s Manual – March 1995
GFK-0787B
Adding Bus Controllers and I/O Modules
When you select Insert from the System screen, the following menu appears
Configure Bus Controller groups
Configure Input Group
Configure Output Group
Configure non-voted discrete I/O
Configure non-voted analog I/O
Create the configuration by selecting items from the menu, then completing entries on the
screens that appear. Instructions for completing these screens begin on the next page.
To display the configuration screen for the currently-highlighted menu selection, click on
it with the mouse or press the Enter key.
The Bus Controller and I/O group configuration windows have some additional mouse
or keyboard features not used in other configuration windows.
On the example screen below, three Bus Controller groups have been configured. Group
1 has five input and output block groups. Group 2 has two I/O block groups. No I/O has
yet been configured for Bus Controller Group 3.
On this screen, you can move between Bus Controller groups by clicking the mouse on
the group you want or by pressing the Alt key then entering the number of the Bus
Controller group.
If you want to display all of the I/O group windows as they are shown above, select
Windows, then Cascade from the functions at the top of the screen.