Filter
Top Products
6
6-38 Genius Modular Redundancy Flexible Triple Modular Redundant (TMR) System
User’s Manual – March 1995
GFK-0787B
Autotest: By default, each circuit is set up for autotesting, as shown by
the X next to the circuit number. To turn off autotesting for any circuit,
select that circuit (click on the circuit or select it using the cursor keys).
Press the space bar key to remove (or replace) the X.
Note: It is possible for an
output block to include
circuits that are not part
of the GMR system, and
which are not to be
autotested. Be sure to turn
autotest off for any unused
and non-GMR circuits.
Normal State: By default, each circuit is set up to have On as its Normal
(non-alarm) State for purposes of autotesting. The selection is shown by
the X next to the circuit number. If the autotest alarm state of any circuit
should be Off, select that circuit (click on the circuit or select it using the
cursor keys). Press the space bar key to remove (or replace) the X.