Filter
Top Products
6
6-43GFK-0787B Chapter 6 Configuration
Creating the G_M_R10 Output File
The output of the GMR configuration process is a program block named G_M_R10,
which can be imported to the application program folder in Logicmaster 90.
The Write Output function of the GMR configuration software automatically creates a
file named G_M_R10.EXE. This is the file required by Logicmaster 90.
If the configuration you want to use is not the one currently displayed, first use the file
utilities of the GMR configuration software to load it into RAM memory.
Example:
Previously, you created and saved three different configuration files, named CONFIG1,
CONFIG2, and CONFIG3, as represented below. All three files are currently stored on
your hard disk. A different configuration, CONFIG4, is currently in RAM memory.
Saved
Configuration
Files
CONFIG1.SAV
CONFIG2.SAV
CONFIG3.SAV
CONFIG4
Configuration
in RAM
At this point, you decide you want to use CONFIG3 as the GMR configuration for the
application. First, you need to load CONFIG3 into RAM memory. If you wanted to keep
the file already in RAM memory, CONFIG4, you would need to use the file functions of
the GMR software to save it.