Filter
Top Products
1
1-10 Genius Modular Redundancy Flexible Triple Modular Redundant (TMR) System
User’s Manual – March 1995
GFK-0787B
Configuration and Programming
The GMR Software
The GMR software consists of:
The GMR configuration software file, CONFIG.EXE. This file, which runs under DOS, is
used to enter the system parameters that will be used by the GMR system software. When
the GMR configuration is completed, it produces a Program Block named G_M_R10.
A directory named GMRxxyy containing the GMR system software files, to which
the application program will be added. In the directory name GMRxxyy, xx is two
digits representing the major revision level of the GMR software. The last two digits
(yy) represent the minor software revision level.
A “teach” file named KEY0.DEF for use in future application program updates.
Subsequent chapters of this book explain configuration steps and programming
guidelines for a GMR system. The basic steps are illustrated below.
CONFIG.EXE
GMRxxyy
KEY0.DEF
GMR CONFIGURATION
GMR
Configuration
Printout
G_M_R10
Program
Block
LM90 CONFIGURATION
CONFIGBCONFIGA
LM90 PROGRAMMING
The
Application
Program
LM90
Librarian
LM90
Copy Folder
PLC A
PLC B PLC C
CONFIGC
GMR
Diskette
LM90
Copy Folder
LM90
Copy Folder
LM90
Store
LM90
Store
LM90
Store
future
program
updates
I/O Block Configuration with
Hand-held Monitor