GE GFK-0787B Noise Reduction Machine User Manual


 
Index
Index-3
GFK-0787B
Inputs and outputs, number available, 1-9
Installation information, 8-1
Internal Channel fault, 5-28
L
LED, Block OK, 3-9
Limit discrepancy, 5-12 , 6-36
Line fault, 5-2 , 5-25
Line monitoring, 2-7
Load sharing by output blocks, 3-6 , 5-16
Logicmaster software, version required,
1-2
Logon control, 7-17
Loss of Block fault, 4-18 , 6-30
M
%M command flags, 7-13
%M initialization data, 7-9 , 7-16
%M status definitions, 7-11
Manual inhibit, 2-8
Manual override, 3-8 , 5-23
Manual trip, 2-8 , 3-8 , 5-23
N
No Load fault, 3-9 , 5-2 , 5-16 , 5-26
Non-voted analog inputs, 2-10
Non-voted discrete I/O, 1-9 , 2-4
O
Open Wire fault, 5-28
Output blocks, 3-2
configuring serial bus address, 6-37
Output controls, 5-23
Output groups, 3-2 , 3-6
Output subsystems, 3-1 , 3-2
Outputs
autotesting, 5-7
configuring autotest, 6-37
disabled at startup, 4-2
discrepancy reporting, 5-12
discrepancy status, 7-11
discrete, in PLC, 4-17
discrete, voting, 3-3
enabled, 7-12
enabling at startup, 7-16
fault reporting, 3-5
GMR configuration, 6-37
load sharing, 3-6 , 5-16
logical references, 5-26
manual trip and override, 3-8
Output Table addressing, 7-5
physical references, 5-26
processing by PLC, 1-7 , 4-17
pulse test during autotest, 5-10
reference addresses, 6-37
voting by blocks, 1-7
wiring, 8-10 , 8-11 , 8-12 , 8-14 , 8-15 ,
8-17
Outputs and inputs, number available, 1-9
Overhead sweep impact time, sweep im-
pact of Genius I/O and GBCs, 4-6
Overload fault, 5-2 , 5-26
Overrange fault, 5-28
Overtemperature fault, 5-2 , 5-26
P
PLC Online status, 7-11
PLC operation, 1-3 , 1-7 , 4-1 , 4-5
Power supplies for blocks, 8-3 , 8-6 , 8-7 ,
8-8 , 8-9
Powerfeed output, 4-18 , 6-30
Program Download utility, 7-35
Programming, overview, 1-10 , 7-2
Pulse test operation, 5-10
Pulse testing, configuring for I/O blocks,
6-52
R
%R memory, 7-9
Redundancy mode, 3-9 , 6-53
Reference address, configuring for I/O
block, 6-51