Filter
Top Products
Setting Up and Using OpenLCR
40
1 Press once and once.
2 Press once and once.
3 Press once.
4 Press (SET) to set the new phone number.
• Note: If you wish to restore the factory-set number, press for CLEAR
and then go to Step 6.
5 Press the number keys to enter the new phone number.
6 Press to store the number.
7 Press to return to the date and time display.
8 Press , to download new rate data.
• If you have not yet registered with OpenLCR, your fax will receive new
phone numbers that will allow you to connect to OpenLCR. Register using
one of the procedures described at the beginning of this chapter.
FUNCTION
1
2
START/MEMORY
STOP
OpenLCR
2
To obtain the correct phone number, call OpenLCR at 970-206-1207, and
then program the number into the fax machine as explained below.
♦ Note: The number that you will obtain is the number for manually
downloading rate data (dialed by pressing the OpenLCR key and 2). When
you manually download the rate data, the new numbers for registering
(dialed by pressing the OpenLCR key and 1, 3, or 5) will also be
programmed in your fax machine.
Display:
LCR SETTING
CENTER # MODE
1=SET, 2=CLEAR