Filter
Top Products
The Generac EZ Switch™ is designed to operate with 8-17kW air-cooled
generators. This 100 amp Transfer switch has an integrated load center
for picking up the emergency circuits. It is especially useful where
the main service is large and only a portion of the building load will
be served by the generator. It is available with a built in 10, 12, 14 or
16-circuit load center to supply only those circuits that are essential
during an emergency. All standard and load center transfer switches are
UL and CUL Listed and suitable for use as optional standby systems
(NEC702).
All EZ Switches are housed in a steel NEMA 1 enclosure, with
electrostatically applied and baked powder paint. The Heavy Duty
Generac Contactor is a UL recognized device, designed for years of
service. The control at the generator handles all the timing, sensing and
exercising functions.
The transfer switch contactor is rated at 250 VAC and is available in a
single phase configuration only.
GENERAC
®
EZ SWITCH™
Pre-wired Automatic Transfer Switch
with Built In Load Center
100 Amp, 250 VAC, NEMA 1
DESCRIPTION STANDARD FEATURES
CONTACTOR RATING
®
Model RTS10EZA1 – 10 Circuit Switch
Model RTS12EZA1 – 12 Circuit Switch
Model RTS14EZA1 – 14 Circuit Switch
Model RTS16EZA1 – 16 Circuit Switch