Gigabyte GN-BR404W Network Router User Manual


 
3-3. Setup for Broadband Router
The GN-BR404W provides Web based configuration. You can configure your GN-BR404W
through your Internet Explorer browser or Netscape Communicator.
Step 1. Key in the preset IP address“192.168.1.254” in the address column in the
browser, and then press enter.
If you have more than one router or IP conflict problem on the same subnet,
please follow the IP change priority table shown as below.
priority1 "192.168.1.254" "255.255.255.0" "192.168.1.1" "192.168.1.33"
priority2 "192.168.2.254" "255.255.255.0" "192.168.2.1" "192.168.2.33"
priority3 "172.16.1.254" "255.255.255.0" "172.16.1.1" "172.16.1.33"
priority4 "172.17.1.254" "255.255.255.0" "172.17.1.1" "172.17.1.33"
priority5 "10.1.1.254" "255.255.255.0" "10.1.1.1" "10.1.1.33"
priority6 "10.2.1.254" "255.255.255.0" "10.2.1.1" "10.2.1.33"
Step 2. The dialogue box will appear as shown in the following diagram, and key in the
default user name “admin” for the wideband network GN-BR404W and the
default password “admin”, and then press “OK”.
28