Filter
Top Products
98
98
2.2 Connecting the AC Adapter
The AC adaptor converts AC power to DC power and reduces the
voltage supplied to the computer. It can automatically adjust to any
voltage from 100 to 240 volts and the power output in 18.5 volts,
3.5A, enabling you to use the computer in almost any region.
CAUTION: Use only the AC adaptor and cord we recommended.
Use of wrong adaptor could damage your computer. We assume
no liability for any damage in such case.
To connect the adaptor properly, please follow the steps as below:
1. Connect the power cord to the AC adapter.
2. Connect the AC adapter to the DC power port on the rear of your
computer.
3. Connect the AC adapter power cord to an AC outlet.
2.3 Turning Your Notebook On and Off
►Turning on the power◄
Open the display panel, press and hold the power button for one or
two seconds. The power indicator glows blue after the computer is
turned on.
►Turning off the power◄
If you are not going to use N211U notebook computer for a while,
it is best to turn off the power of the notebook computer for longer
use. Before turning off the power, you need to close all application
programs and then shutdown the operating system.
After turning off your N211U notebook computer, make it a habit
to leave the LCD panel open for a while whenever used for an
extended period of time. This allows the inside parts of your note-
book computer to cool off. Closing the panel will force the heat up
against the LCD screen, which may degrade the LCD when done
regularly. More importantly, never close the LCD panel for a long
period of time when computer is on while power-saving features
are disabled.
►Suspemd mode◄
Adjust the default power management settings in the Power Op-
tions/ Advanced dialog box. The Power Options Properties dialog
box allows you to set different actions to take when the computer is
left idle for a certain amount of time.