Filter
Top Products
For Single–Line Parallel Automatic Lubrication Systems.
GL-1 Injector Models
Important Safety Instructions
Read all warnings and instructions in this manual and related automatic
lubrication system instruction manuals. Save all instructions.
SKIN INJECTION HAZARD
Fluid from the injector, leaks, or ruptured components
can inject fluid into your body and cause extremely seri-
ous injury, including the need for amputation. Fluid
injected into the skin might look like just a cut, but it is a
serious injury. Get immediate surgical treatment.
Fluid splashed in the eyes or on the skin can also
cause serious injury. The equipment may be pressur-
ized already, or it could become pressurized by an
automatic lube cycle initiated by Lubrication Controller
(timer). Disconnect power to the timer, and disconnect
the air supply to the pump module to ensure that the
system is depressurized. See the pressure relief pro-
cedure in the pump manual incuded with your auto-
matic lubrication system.
Part No. Description Dimension A Dimension B Bare Manifold Part No.
114901
Injector, GL–1, one point
2.48 in. (63.0 mm) 114911
114902
Injector, GL–1, two point
3.00 in. (76.0 mm) 114912
114903
Injector, GL–1, three point 1.25 in. (31.7 mm) 4.23 in. (107.5 mm) 114913
114904
Injector, GL–1, four point 2.50 in. (63.4 mm) 5.47 in. (139.0 mm) 114914
114905
Injector, GL–1, five point 3.75 in. (95.1 mm) 6.71 in. (170.5 mm) 114915
117206
Injector, GL-1, six point 4.99 in. (126.8 mm) 7.90 in. (202.7 mm) 118206
114909
Injector, GL–1, replacement
1-1/4”
7-1/16”
A
B
1/8” npt
dispense
outlet
13/32”
mounting
holes
3/8” npt
(2) supply
inlet/outlet
Model 114903 Shown
Instructions-Parts List
GL-1
®
Injectors
308953N
EN