Filter
Top Products
FIGURE 3: SCREENSHOT OF CONFIGURATION LOG-IN PAGE
The password is case sensitive with maximum length of 25 characters. The factory default password for
End User and administrator is “123” and “admin” respectively. Only an administrator can access the
“ADVANCED SETTING” configuration page.
NOTE: If you can not log into the configuration page by using the default password, please check with
the VoIP service provider. It is most likely the VoIP service provider has provisioned the device and
configured for you therefore the password has already been changed.
After a correct password is entered in the login screen, the embedded web server will respond with the
Configuration pages which are explained in details below.
TABLE 7: HT503 DEVICE STATUS PAGE DEFINITIONS
MAC Address
The device ID, in HEX format. This is very important ID for ISP troubleshooting.
WAN IP Address
This field shows IP address of the HT503.
Product Model
This field contains the product model info, such as HT503.
Software Version
Program: This is the main software release. This number is always used for firmware
upgrade. Current release is 1.0.0.6
Bootloader: current version is 1.0.0.7.
Core: current version 1.0.0.14
Base: current version is 1.0.0.5
System Uptime
This shows system up time since last reboot.
PPPoE Link Up
This shows whether the PPPoE is up if connected to DSL modem
NAT
This shows what kind NAT the HT503 is connected to. It is based on STUN protocol. If
the detected NAT is symmetric NAT, STUN will not work and Outbound Proxy needed
to make HT503 functioning correctly.
Port Status
Displays information regarding the individual FXS ports.
Port Hook Registration DND Forward Busy
Forward
Delayed
Forward
FXS On Hook Registered
Yes 613
FXO On Hook Registered
No 614
• Both FXS port and FXO port are registered with this SIP Server.
• FXS Port user has set Do Not Disturb.
• FXS Port user has set his calls to be forwarded unconditionally to ext 613.
FXO Port user has set his calls to forward to 614 when his phone is busy.
T
ABLE 8: HT503 BASIC SETTINGS PAGE DEFINITIONS
Grandstream Networks, Inc. HT503 User Manual Page 19 of 35
Firmware 1.0.0.6 Last Updated: 6/2007