Home Automation 60A00-1 HAI 15A Switch User Manual


  Open as PDF
of 3
 
HAI UPB™ Appliance Module
Installation and Operating Instructions
For the following Models:
60A00-1 HAI 15A Appliance Module
READ THESE INSTRUCTIONS BEFORE INSTALLING DEVICE
This HAI UPB™ Appliance Module is intended for installation in accordance with the National Electrical Code and local codes and
regulations. Retain these instructions for reference.
This product is for indoor use only.
HAI UPB™ Appliance Module Overview
The HAI UPB™ Appliance Module (Figure 1) is a plug-in device that incorporates the UPB™ two-way powerline communication
technology, which gives it the ability to be remotely controlled by UPB™ compatible controllers. The Appliance Module has one
UPB™ controllable outlet that can sense the load’s local on/off switch (switch trigger) to turn the load on even after it was turned off
using UPB™ control.
Note: The switch trigger feature is disabled by default; it may not work for all types of loads (e.g. fluorescent lighting loads).
The HAI UPB™ Appliance Module is also capable of transmitting UPB™ messages when the local load switch is used to turn the
load on or off.
Each appliance module can be configured to custom fit an individual’s lifestyle and desires.
UPB Controlled
Outlet
Pushbutton
LED
Figure 1 - HAI UPB™ Appliance Module
60I00-1, Rev A
next