HP (Hewlett-Packard) 1000 Printer User Manual


 
Two-sided printing
www.hp.com/photosmart 49
10. If your document contains a lot of color, you may want to increase the dry time for
the first side of the page.
Select the
Advanced
tab.
•In the
Extra Dry Time
area, click and drag the slider to the right to increase
the dry time. Click and drag the slider to the left to decrease the dry time.
11. Click
OK
to close the Properties dialog box, then click
OK
again to begin printing
your document.
After printing the first side of the page, the printer holds the paper in the output tray
while the ink dries. When the ink is dry, the Two-Sided Printing Module pulls the
paper back into the printer, and begins printing the second side of the page. When
the printer finishes printing both sides of the page, it releases the page in the output
tray.
Note:
You can click
OK
to close the Dry Time Pause dialog box or it will
automatically close for you.
Manually reloading paper to print the second side
1. Follow steps 1–9 of “Automatic two-sided printing” above.
2. Make sure
Automatic
is deselected.
3. Click
OK
to close the Properties dialog box, then click
OK
again to begin printing
your document.
4. When the first side of your document finishes printing, remove the paper from the
output tray.
5. Follow the instructions on the screen to determine how to place the paper back into
the paper tray.
6. On your computer screen, click
Continue
.