Filter
Top Products
3. Remove the battery (3) from the computer.
To insert the battery:
1. Align the tabs on the rear edge of the battery with the notches on the rear edge of the battery
bay.
2. Pivot the front edge of the battery down into the battery bay until it is seated. (The battery
release latch will automatically lock into place.)
Optical drive (select models only)
NOTE: The optical drive spare part kit includes a bezel and bracket.
Description Spare part number
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe (select models
only)
646126-001
DVD±RW and CD-RW Drive 659879-001
DVD-ROM Drive 659638-001
Optical drive slot space saver 659632-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
40 Chapter 4 Removal and replacement procedures