Filter
Top Products
Description Spare part number
Top cover (includes TouchPad and TouchPad cable) 646137-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 39).
5. Remove the optical drive (see
Optical drive (select models only) on page 40).
6. Remove the keyboard (see
Keyboard on page 49).
When replacing the top cover, be sure that the following components are removed from the defective
top cover and installed on the replacement top cover:
●
Power button board and cable (see
Power button board on page 55)
●
TouchPad button board and cable (see
TouchPad button board on page 56)
Remove the top cover:
1. Close the computer.
2. Turn the computer upside down, with the front toward you.
3. Remove the eight Phillips PM2.5×6.0 screws on the surface of the base enclosure that secure
the top cover to the computer.
52 Chapter 4 Removal and replacement procedures