Filter
Top Products
6. Open the computer.
7. Remove the two Phillips PM2.5×6.0 screws (1) that secure the power connector and bracket to
the computer.
8. Remove the power connector bracket (2).
9. Remove the power connector (3).
Reverse this procedure to install the power connector cable.
Speakers
Description Spare part number
Speaker Kit (includes left and right speakers and cable) 647315-001
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 39), and then remove the following components:
●
Optical drive (see
Optical drive (select models only) on page 40)
●
Keyboard (see
Keyboard on page 49)
●
Top cover (see
Top cover on page 51)
●
USB board (see
USB board on page 58)
60 Chapter 4 Removal and replacement procedures