Filter
Top Products
Display assembly
Description Spare part number
15.4-inch, WXGA+BrightView display assembly for use only with HP G50 computer models (includes 2 WLAN antenna
transceivers and cables, microphones and cables, and logo)
Includes webcam module and cable
487603-001
Does not include webcam module and cable 487602-001
15.4-inch, WXGA+BrightView display assembly for use only with Compaq CQ50 computer models (includes 2 WLAN antenna
transceivers and cables, microphones and cables, and logo)
Includes webcam module and cable
485047-001
Does not include webcam module and cable 487046-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 40).
5. Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 49).
6. Remove the keyboard (see
Keyboard on page 52).
7. Remove the keyboard cover (see
Keyboard cover on page 54).
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
2. Remove the wireless antenna cables (2) from the routing channel and clips (3) built into the top
cover.
Component replacement procedures 57