Filter
Top Products
Keyboard
NOTE: The keyboard spare part kit includes a keyboard cable.
For use in country or region: Spare part number: For use in country or region: Spare part number:
Keyboard in charcoal finish:
For use in Brazil 659500-201 For use in Latin America 659500-161
For use in Canada 659500-121 For use in the United States 659500-001
Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 32).
5. Remove the service cover (see
WLAN module on page 37).
Remove the keyboard:
1. Remove the two rubber feet (1) that are attached to the rear corner covers. The rubber feet are
attached to the rear corner covers by double-sided tape and are included in the Rubber Kit, spare
part number 664996-001.
2. Remove the two Phillips PM2.0×5.7 screws (2) that secure the rear corner covers to the computer.
3. Remove the rear corner covers (3). The rear corner covers are included in the Rubber Kit, spare
part number 664996-001.
46 Chapter 4 Removal and replacement procedures