HP (Hewlett-Packard) HP vs15 Computer Monitor User Manual


 
Technical Specifications
User’s Guide B–9
Power Cord Set Requirements
The monitor power supply is provided with Automatic Line
Switching (ALS). This feature allows the monitor to operate on input
voltages between 100–120V or 200–240V .
The power cord set (flexible cord or wall plug) received with the
monitor meets the requirements for use in the country/region
where you purchased the equipment.
If you need to obtain a power cord for a different country/region,
you should purchase a power cord that is approved for use in that
country/region.
The power cord must be rated for the product and for the voltage
and current marked on the product’s electrical ratings label.
The voltage and current rating of the cord should be greater than
the voltage and current rating marked on the product. In addition,
the cross-sectional area of the wire must be a minimum of
0.75 mm² or 18AWG, and the length of the cord must be
between 4.94 ft. (1.5 m) and 12 ft. (3.6 m). If you have
questions about the type of power cord to use, contact your
HP-authorized service provider.
A power cord should be routed so that it is not likely to be walked
on or pinched by items placed upon it or against it. Particular
attention should be paid to the plug, electrical outlet, and the point
where the cord exits from the product.