HP (Hewlett-Packard) J4500 Printer User Manual


 
Change the copy settings
You can customize the copy settings to handle nearly any task.
When you change copy settings, the changes are for the current copy job only. You
must set the changes as defaults for the settings to apply to all future copy jobs.
To save the current settings as defaults for future jobs
1. Press left arrow
or right arrow to navigate between different copy options,
make any changes to the copy function settings, and then press OK to accept the
changes.
2. Press right arrow
until Set As Default appears, and then press OK.
3. Press right arrow
to select Yes, and then press OK.
Set the number of copies
You can set the number of copies that you want to print by using the No. of Copies
option on the device control panel.
To set the number of copies from the device control panel
1. Make sure you have paper loaded in the main tray.
2. Place your original face down on the scanner glass.
3. Press the left arrow
or right arrow to select Copy B&W or Copy Color, and
then press OK.
4. Press right arrow
or use the keypad to enter the number of copies, and then
press OK.
TIP: If you hold down either of the arrow buttons, the number of copies
changes by increments of 5 to make it easier to set a large number of copies.
5. Press Start.
NOTE: Copy functions can also be performed using the HP Photosmart Studio
Software (Mac OS). See the software's Help for more information.
Set the copy paper size
You can set the paper size on the device. The paper size you select should match
what is loaded in the main tray.
To set the paper size from the device control panel
1. Press the left arrow
or right arrow to select Copy B&W or Copy Color, and
then press OK.
2. Press right arrow
until Copy Paper Size appears, and then press OK.
3. Press right arrow
until the appropriate paper size appears, and then press OK.
4. Press Start.
Set the copy paper size
31