Filter
Top Products
To share the device
1. Click Start, point to Settings, and then click Printers or Printers and Faxes.
- Or -
Click Start, click Control Panel, and then double-click Printers.
2. Right-click the device icon, click Properties, and then click the Sharing tab.
3. Click the option to share the device, and give it a share name.
4. To share the device with client computers that use other versions of Windows,
click Additional Drivers to install those drivers as a convenience to the users. You
must have the Starter CD in your CD drive.
Configure the device (Mac OS)
You can use the device with a single Macintosh computer using a USB cable, or you
can share it among other users on a network.
This section contains the following topics:
•
To install the software
•
Share the device on a locally shared network
To install the software
1. Connect the device to your computer with a USB cable.
2. Insert the Starter CD into the CD drive. Double-click the CD icon on the desktop,
and then double-click the setup icon. Also, you can locate the Installer folder on
the Starter CD.
3. Click Install Software and follow the onscreen instructions.
4. If necessary, share the device with other Macintosh computer users. For more
information, see
Share the device on a locally shared network.
Share the device on a locally shared network
When you connect the device directly, you can share it with other computers using a
simple form of networking known as locally shared networking. Use this configuration
only in small groups or when usage is low. The connected computer is slowed down
when many users print to the device.
Basic requirements for sharing in the Mac OS environment include the following items:
• The Macintosh computers must be communicating on the network using TCP/IP,
and they must have IP addresses. (AppleTalk is not supported.)
• The device that is being shared must be connected to a built-in USB port on the
host Macintosh computer.
• Both the host Macintosh computer and the client Macintosh computers that are
using the shared device must have printer sharing enabled, and the driver or PPD
for the device that is installed.
Configure the device (Mac OS)
95